Fenggong will introduce you how to adjust the roller shutter machine

Release time:

2023-03-08

Classify： frequently asked questions

Classify： Industry News

First, the first greenhouse roller shutter machine power transmission operation, about 1 meter up, look at the straightening of the curtain, if the curtain is not straight, you can analyze the reason for the lack of straightening according to the specific situation, and take straightening measures. In this operation, whether the curtain is straight or not, the greenhouse roller shutter machine must be returned to the initial position, the purpose is to test run, one is to make the straw curtain roll, and the other is to lightly run in the greenhouse roller shutter machine.

Second, the second power transmission operation, the greenhouse roller shutter machine is rolled up to about 2/3, repeat step one, the purpose is still to promote its straw curtain to further roll and moderate running-in of the greenhouse roller shutter machine. Then, the greenhouse roller shutter machine is returned to its initial position again.

Third, see whether the straw curtain is rolled up neatly and straight, and whether there is any deviation; If the above phenomenon is found, it should continue to be adjusted until it meets the practical requirements. Finally, the self-adhesive safety mark is firmly posted in the appropriate part of the main rod of the greenhouse roller shutter machine to show that the user pays attention to the safety of operation.

Fourth, before the third power transmission, carefully check whether the motor, greenhouse roller shutter machine has obvious temperature rise phenomenon, abnormal sound, peculiar smell, if the temperature rise does not exceed the ambient temperature of 40 °C, and no greenhouse roller shutter machine is found to have abnormal sound, odor, can carry out the third power transmission operation, so that the greenhouse roller shutter machine in place.

During commissioning, attention must also be paid to:

First, before use, the body of the greenhouse roller shutter machine should be injected with an appropriate amount of engine oil (the specific amount is determined according to the size of the roller shutter), and it should be replaced once a year in the future.

Second, during the rolling process of the greenhouse roller shutter machine, the operator must stand on the two hills of the greenhouse with the switch in hand, and it is strictly forbidden to stand in front of the shed, and stay away from the host and the rotating straw curtain and insulation quilt.

3. When the greenhouse roller shutter machine rolls up to 30 cm on the roof of the shed, it must be stopped. If the brake fails, please quickly put the reverse switch in the reverse (reverse) direction so that the roller shutter machine can be put down normally and then repaired.

Key words: Chenhe, Fenggong

None

Types of film reels