
What are the points to pay attention to in the installation and use of greenhouse film reel?
Release time:
2023-03-08
Classify: frequently asked questions
Classify: Industry News
The greenhouse film reel should be filled with antifreeze gear oil. During installation and use, it is necessary to frequently check whether the screws of the host and each connection are loose, and whether there are problems such as fracture or open welding at the welding place. After each use, cut off the total power supply outside the shed in time.
Here's a look at safe use:
1. According to the length, width, arch and weight of the agricultural film of the greenhouse, select the appropriate host according to the standard, pay attention to leaving a load margin, prohibit full load and overload operation, and take necessary safety and anti-theft measures for the motor.
2. According to the weight of the coil film, use the support rod, pusher, roll rod and bolt according to the standard to avoid the unreasonable configuration of the rod and screw rod.
3. The cables and other power distribution equipment purchased by the user should be qualified products that meet the national standards to ensure the safety of electricity and the safe operation of the host.
4. Fix the reverse switch on the main engine support rod, and add a control knife gate in front of the reverse switch to ensure that the power supply can be cut off in time when the reverse switch fails.
5. The host has added a sufficient amount of qualified lubricating oil when leaving the factory, and the user does not need to re-join.
6. In ice and snow weather, clean up the cold film and start the film reel to prevent damage to the agricultural film due to rain and snow freezing.
7. It is forbidden to touch the reel rod when the reel is reeled, and the reel should be turned off in time after the reel is rolled in place to prevent the reel from turning offside into the shed.
8. During the installation and use of the user, when the pole and roll rod deviate, the bolt should be adjusted, straightened and tightened in time to ensure the normal operation of the main engine and members and prolong the service life.
Key words: Chenhe, Fenggong
Previous Page
Next Page
Related News